POSTLESS TECHNOLOGY.
Same Oil. Better experience.
Ready to rock
Auto-draw actived.
Led Screen
Click to turn on.
Stoner Proof.
puff counter
Track your hits.
Battery Life
Don't get stuck
on empty.
Puff duration
But who's keeping score ;)
Mark your mix
Customize your vape.
Click to turn the screen on, screen turns off after 5 seconds of inactivity.
Button not required for device activation, no 5 clicks, no variable voltage. Auto-draw activated with pre-set 2.4v for optimized flavour and vapour production.
button - Screen on
After each inhale, the number displayed on the screen will increase by 1.
Note – puff counter only increases for pulls of 0.3 seconds or longer. Puff counter will only increase after first 3-5 puffs when atomizer is fully primed. Puff counter will go up to 199 and will not go past this number no matter how many puffs are taken after this number is reached.
To reset puff counter, press and hold the button for 10 seconds. Screen will turn off after 5 seconds, continue to hold until puff counter resets to zero.
puff counter
Puff Duration
When the air sensor is activated, vaping time will be displayed in seconds (0.1, 0.2, 0.3…).
When puff duration is ≥ 10 seconds, the vaping time on the screen flashes for 5 seconds and resets.
Don't get stuck on empty!
Battery Life
Frequently asked questions
What is a postless atomizer?
The atomizer is the part of the vape responsible for turning oil into vapour. Traditional designs use a center post inside the atomizer. BOXHOT's postless design takes a traditional atomizer and flattens it so it no longer needs a post, creating a wide flat heater where the oil is vaporized and a separate air path for improved airflow, reliability and performance.
Why is a postless design beneficial?
-
Better Flavour > Cooler vaporization temperature. When airflow moves more freely, flavour comes through stronger and more consistently.
-
More Reliable > Efficient airflow path for smooth consistent draws. Less restriction means smoother draws throughout the lifetime of the device.
-
Consistent Performance > Better heating efficiency directs more energy toward vaporization and less into the surrounding oil, helping deliver consistent flavour from the first puff to the last.
-
Better Oil Utilization > Designed to maximize oil consumption, outputting more vapour with less power. More hits, Less waste.
Does the postless design improve flavour?
Yes. By optimizing oil flow and maintaining consistent ceramic heating temperatures, the postless design can help preserve terpene profiles and flavour quality.
Does the postless atomizer reduce clogging?
While no vaporizer is completely clog-proof, postless systems are engineered to improve airflow and reduce common blockage issues.
Proper storage remains important.
What does the screen display?
The screen provides key information at a glance, including:
-
Puff counter
-
Battery life
-
Puff duration
The display helps consumers monitor usage and know when charging is required.
Why is there a puff counter?
The puff counter serves several purposes:
-
Helps consumers track consumption.
-
Allows users to estimate remaining oil.
-
Provides consistency when dosing.
-
Helps identify changes in device performance over time.
Many consumers use puff count to better understand their personal tolerance and usage patterns.
How many puffs can I expect from a 1.0g device?
Actual puff count varies based on puff duration and draw strength.
Based on an average of 3 second puffs, you should expect 200-300 hits.
How long does the battery last?
A full charge is typically designed to last through a significant portion of the device's oil capacity.
Actual battery performance depends on:
-
Puff duration
-
Frequency of use
-
Environmental conditions
-
Time
How do I charge the device?
Use a USB-C charging cable and power source.
Best Practices:
-
Charge at room temperature.
-
Disconnect after reaching full charge.
Why am I not getting vapour?
Potential causes include:
-
Battery depleted
-
Airflow obstruction
-
Oil too cold
-
Device protection activated
-
Cartridge reservoir empty
Try:
-
Fully charging the device.
-
Allowing the device to warm to room temperature.
-
Taking slow, gentle draws.
-
Checking for airflow blockage.
-
Blow through USB port to help clear blockages.
Why does my oil look darker over time?
Cannabis extracts naturally darken as they age or are repeatedly heated.
This is normal and may result from:
-
Oxidation
-
Exposure to heat
-
Exposure to light
Why are there small bubbles in the oil?
Bubbles are normal and occur due to:
-
Temperature changes
-
Oil movement
-
Consumption of product
-
Large bubbles often appear after extended use.
How should devices be stored?
Store products:
-
Upright when possible.
-
At room temperature.
-
Away from direct sunlight.
-
Away from excessive heat or freezing conditions.
Can cold temperatures affect performance?
Yes. Cold oil becomes more viscous and may:
-
Reduce vapor production.
-
Restrict oil flow.
-
Increase clogging risk.
-
Shorten battery life.
Allow the device to return to room temperature before use.
Can high temperatures affect performance?
Yes. Excessive heat may:
-
Thin the oil excessively.
-
Increase leakage risk.
-
Accelerate cannabinoid degradation.
-
Affect terpene retention.
Troubleshooting guide
Error code e2 - Short circuit protection
When a short circuit of the atomizer is detected before or during activation, the screen displays E2, the atomizer stops outputting, remains on for 2 seconds, and then turns off.
Error code E3 – Vaping when the circuit is open
When an open circuit is detected before activating, E3 is displayed, the atomizer stops outputting, remains on for 2 seconds, and then turns off.
what to do in case of issues
If you experience these error codes, please complete this form for support.
Weak Vapor Production
Possible causes:
-
Low battery
-
Oil too cold
-
Airflow restriction
Recommended actions:
Recharge device
Warm to room temperature
Clean mouthpiece
Device Not Activating
Possible causes:
-
Battery depleted
-
Protection mode activated
-
Internal fault
Charge device
-
Verify charging function
Clogged Airflow
Possible causes:
-
Condensation buildup
-
Thick oil
-
Storage conditions
Recommended actions:
-
Warm device slightly using hands
-
Take gentle primer puffs
-
Store upright
-
Blow through USB port to help clear blockages.
Best Practices for Consumers
For the best experience:
-
Store upright whenever possible to ensure oil saturates the atomizer.
-
Keep device at room temperature.
-
Use steady 2–4 second draws.
-
Avoid extremely long draws and chain vaping.
-
Allow time between draws
-
Recharge before the battery becomes completely depleted.
-
Keep the mouthpiece clean.
-
Protect the device from excessive heat, cold, and direct sunlight.
-
These practices help maximize flavor, vapor consistency, battery performance, and overall device lifespan.
